05-25-2011 07:26 PM - edited 03-03-2019 06:17 AM
Hi,
I would like to clarify the exact operation of the below command:
ip access-list extended VoiceACL
permit udp any any range 16384 16387
Thus the range statement in the above access list specify that it allow only three ports "16384 to 16387". Is that correct ? Bit confused with this command. One of my friend said that the range statement not just specify 3 ports,but it specify the starting port as 16384 and the end port number 32771 [16384+16387].
Value1] = starting port number
[Value2] + [Value1] = end port number
Thanks
Nachi
Solved! Go to Solution.
05-30-2011 03:25 AM
Hi Nachi,
This represent the ports ranging between the first number and the last number included, in your case this is actually 4 ports: 16384, 16385, 16386 and 16387
Regards,
Raphael
05-30-2011 03:25 AM
Hi Nachi,
This represent the ports ranging between the first number and the last number included, in your case this is actually 4 ports: 16384, 16385, 16386 and 16387
Regards,
Raphael
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide