Ater Upgrade, The startup is logging this menssagge:
%SYS-6-READ_BOOTFILE_FAIL: bootflash:c6msfc-is-mz.121-1.E File boot failed -- File not accessible.
Attempt to download 'slot0:c6sup11-dsv-mz.121-8b.E15' ... okay
Starting download of 'slot0:c6sup11-dsv-mz.121-8b.E15': 8082390 bytes!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I have ereased from slot0: the old version "c6msfc-is-mz.121-1.E.
QUESTION: Why Is The c6509 looking for the old version?
Otherwise, the command "remote command switch show bootvar" show follow:
C6509-MEM-sp#
BOOT variable = slot0:c6sup11-dsv-mz.121-8b.E15,1;bootflash:c6sup11-dsv-mz.121-8b.E15,12
CONFIG_FILE variable =
BOOTLDR variable does not exist
Configuration register is 0x2102
Secondary is up.
Secondary BOOT variable = slot0:c6sup11-dsv-mz.121-8b.E15,1;bootflash:c6sup11-dsv-mz.121-8b.E15,12
Secondary CONFIG_FILE variable =
Secondary BOOTLDR variable does not exist
Secondary Configuration register is 0x2102
QUESTION: Why Does the BootVariable have two devices (slot0: and bootflash)?
Thanks for your response.
Sergio
