Re: AS 5350 : Clock source

kheireddine.sebbah · ‎07-22-2004

Hello

I have AS5350, i cant do Clock source internal on Controler E1. My Telco Switch ISDN can't generate Clock.

Show Version :

Cisco Internetwork Operating System Software

IOS (tm) 5350 Software (C5350-IS-M), Version 12.3(6), RELEASE SOFTWARE (fc3)

Compiled Wed 11-Feb-04 20:32 by kellythw

Image text-base: 0x60008AFC, data-base: 0x61700000

ROM: System Bootstrap, Version 12.2(1r)1, RELEASE SOFTWARE (fc1)

BOOTLDR: 5350 Software (C5350-BOOT-M), Version 12.2(2)XB2, EARLY DEPLOYMENT RELE

ASE SOFTWARE (fc1)

AS535 uptime is 1 day, 17 hours, 21 minutes

System returned to ROM by reload at 16:54:08 cet Tue Jul 20 2004

System restarted at 16:54:47 cet Tue Jul 20 2004

System image file is "flash:/c5350-is-mz.123-6.bin"

cisco AS5350 (R7K) processor (revision T) with 131072K/65536K bytes of memory.

Processor board ID JAE07150B3A

R7000 CPU at 250MHz, Implementation 39, Rev 1.0, 256KB L2, 2048KB L3 Cache

Last reset from IOS reload

Channelized E1, Version 1.0.

Bridging software.

X.25 software, Version 3.0.0.

Primary Rate ISDN software, Version 1.1.

can any one help me??

Best regards

Kheireddine

makchitale · ‎07-22-2004

5350-A(config)#tdm clock priority ?

<1-100> Select priority number. Clocks with priority 1-99 drive the TDM.

Clock with priority 100 can't drive the TDM.

5350-A(config)#tdm clock priority 1 ?

<1-3> Slot/Port number (e.g. 3/0)

external Select external reference(Bits) clock

freerun Select local oscillator clock

Free-running is the way to go if you want to source clock internally from the 5350.

Thanks, Mak