Assign specific PC to specifice port.

[tranhm]

I have switch model 2950 and 2924. I want to assigne specifice MAC of PC to a specific port of the switche. Can I do this?

Thanks

[Prashanth Krishnappa]

If you are thinking about assigning a static MAC to a port, you can use the mac-address-table static command

Documentation for the 2950

http://cio.cisco.com/univercd/cc/td/doc/product/lan/cat2950/1219ea1/cli/cli1.htm#xtocid54

Documentation for the XL family

http://cio.cisco.com/univercd/cc/td/doc/product/lan/c2900xl/29_35wc5/cli/clicmds.htm#xtocid43

Also you might want to read about port security

http://cio.cisco.com/univercd/cc/td/doc/product/lan/c2900xl/29_35wc5/scg/swports.htm#xtocid20

http://cio.cisco.com/univercd/cc/td/doc/product/lan/cat2950/1219ea1/scg/swtrafc.htm#31465