Hi,
I have a satellite link backuped like this :
Nominal : 7513A <=> satellite (10 Mbs) <=> 7513B
Backup : 7513A <=> satellite (10 Mbs) <=> 7505A <=> DS3 <=> 7513B
My pb is that when i backuped via the DS3, the DS3 is not stable (link protocol up and down) and when it is stable the delay is around 2 and 4 seconds whereas when i'm in nominal operation the delay is 1 ms over the DS3.
Here are the conf :
7513B:
interface Serial9/0/0
ip address 192.168.0.1 255.255.255.252
framing c-bit
cablelength 10
dsu bandwidth 44210
serial restart-delay 0
service-policy output POL4
7505A :
interface Serial1/0/0
ip address 192.168.0.2 255.255.255.252
ip route-cache distributed
framing c-bit
cablelength 10
dsu bandwidth 44210
service-policy output POL4
I tried to remove the QoS and it's the same.
Do u think changing framing or encapsulation will do sommething ??
Thnks for ur help
