Hi All,
I'm having difficulty of finding any document regarding how IOS 12.3 calculate it's bandwidth check.
Assuming that my frame relay traffic is 128K.
Under 12.2, I was able to define the BW for priority queue e.g. 32kbps and assign the sum of other classes up to 100% if I wanted to. Another word, priorty queue is not included into the bandwidth percentage calculation.
Under 12.3, I can't seem to do that anymore. I have to consider the BW of priority queue as part of the percentage allocation i.e 32kbps is considered as 25% therefore I can only allocate my other classes for up to 75% only.
Is this a new "feature" or just happen to be a bug ? Can Cisco or someone confirm this please ?
This is my sample config.
map-class frame-relay 128K
no frame-relay adaptive-shaping becn
frame-relay cir 128000
frame-relay mincir 128000
service-policy output CoS-Out
policy-map CoS-Out
class Cat0-MCast
priority 8
class Cat0-VoIP
priority 24
class Cat1
bandwidth percent 30
random-detect
class Cat2
bandwidth percent 20
random-detect
class Cat3
bandwidth percent 10
random-detect
class Cat9
bandwidth percent 5
random-detect
class class-default
fair-queue
random-detect
