BGP active issue

[ARUN02]

Hi, 

cisco 1841 router configured double BGP but one bgp state active only. 

link port is up ,when restart the router then only BGP is working. 

[Amar_Rajpoot]

If possible, can you share the configuration ?

Also mention whats the frequency for the issue i.e. BGP is going down at fixed time interval or its random.

HTH,

Amar

[Sergey Lisitsin]

ARUN3,

We need a little more information. Could you please share the topology and configuration.

[Jaderson Pessoa]

We need more information, please post output from below commands;

show run | inc bgp

show ip route