01-12-2004 12:19 PM - edited 03-02-2019 12:49 PM
Need help please. How do I filter a specific ip range that I expect to announce to my ISP and get my upstream to filter to only accept that specific IP range from me?
01-13-2004 01:18 AM
Put a route-map on the neighbor statement, and reference the route-map to a prefix-list. Ask your ISP to do the same inbound.
01-13-2004 05:23 AM
There are some sample filtering configurations here:
http://www.cisco.com/en/US/tech/tk365/tk80/technologies_configuration_example09186a008009456d.shtml
http://www.cisco.com/en/US/tech/tk365/tk80/technologies_tech_note09186a0080094a92.shtml
That would probably be a good place to start. You'll have to ask your ISP to set up the filtering on their end.
:-)
Russ.W
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide