C8300 2N2S-6T router port numbers

[CiscoRider]

Hello everyone,

I am searching for the "port numbering" of a C8300 Router, when I use NIM´s like in the picture below.

For example the 6 intergrated ports have the numbers (1G 0/0/0) to (1G 0/0/5). 

But what about the ports on the NIM´s?

Thanks in advance!

[balaji.bandi]

In general most Cisco device follow same standards

if you install slot 1 depends on module, take example if you install switch module

it will be 1/0/X

if you install slot 2

it will be 2/0/X

you can see example installting  C-SM-16P4M2X

https://www.cisco.com/c/en/us/td/docs/routers/cloud_edge/c8300/Interface_Module_SCG/C-SMX16G4M2X-book.html

[CiscoRider]

And if I use the first slot on SM Slot 1 (see image above) it would be 1/1/x ?

[balaji.bandi]

Dont have device in hand i am going with document, i am sure number is not an issue as long as card detected and it show you what port numbers ? is the number is concern here ?