C857W proper bridging between vlan and radio interface

[tekha]

Could any one help me out here. I'm totally lost.

I can't get the dhcp server to work, infact I can't even ping the routers LAN IP. However I have a cabled PC on Fast0 and a laptop on the wireless, and they are infact able to ping each other.

Here is the config:

Router#sh run

Building configuration...

Current configuration : 1454 bytes

!

version 12.4

no service pad

service timestamps debug datetime msec

service timestamps log datetime msec

no service password-encryption

!

hostname Router

!

boot-start-marker

boot-end-marker

!

!

no aaa new-model

!

resource policy

!

ip dhcp use vrf connected

!

ip dhcp pool LAN

network 192.168.1.0 255.255.255.0

default-router 192.168.1.1

!

!

ip cef

no ip domain lookup

!

!

!

!

!

!

bridge irb

!

!

interface ATM0

no ip address

shutdown

no atm ilmi-keepalive

dsl operating-mode auto

!

interface FastEthernet0

!

interface FastEthernet1

!

interface FastEthernet2

!

interface FastEthernet3

!

interface Dot11Radio0

no ip address

!

ssid SOMETHING

vlan 1

authentication open

!

speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0

channel 2462

station-role root

!

interface Dot11Radio0.1

encapsulation dot1Q 1 native

no snmp trap link-status

bridge-group 1

bridge-group 1 subscriber-loop-control

bridge-group 1 spanning-disabled

bridge-group 1 block-unknown-source

no bridge-group 1 source-learning

no bridge-group 1 unicast-flooding

!

interface Vlan1

no ip address

bridge-group 1

bridge-group 1 spanning-disabled

!

interface BVI1

ip address 192.168.1.1 255.255.255.0

!

!

ip http server

ip http access-class 10

no ip http secure-server

!

access-list 10 permit 192.168.1.0 0.0.0.255

!

control-plane

!

!

line con 0

no modem enable

line aux 0

line vty 0 4

!

scheduler max-task-time 5000

end

Router#

Show commands will follow in the next posting.

[tekha]

Router#sh dot11 ass

802.11 Client Stations on Dot11Radio0:

SSID [SOMETHING] :

MAC Address IP address Device Name Parent State

0013.ce86.ff7b 0.0.0.0 - - self Assoc

Others: (not related to any ssid)

Router#sh bridge 1

Total of 300 station blocks, 298 free

Codes: P - permanent, S - self

Bridge Group 1:

Address Action Interface Age RX count TX count

0013.ce86.ff7b forward Do0.1 P 101 1

0050.dad9.ff0a forward Vlan1 12 13 1

Router#sh mac-

Destination Address Address Type VLAN Destination Port

------------------- ------------ ---- --------------------

0013.ce86.ff7b Dynamic 1 Vlan1

0014.f2e2.61c7 Self 1 Vlan1

0050.dad9.ff0a Dynamic 1 FastEthernet0

Router#sh arp

Protocol Address Age (min) Hardware Addr Type Interface

Internet 192.168.1.1 - 0014.f2e2.61c7 ARPA BVI1

Router#sh vlan-s

VLAN Name Status Ports

---- -------------------------------- --------- -------------------------------

1 default active Fa0, Fa1, Fa2, Fa3

1002 fddi-default active

1003 token-ring-default active

1004 fddinet-default active

1005 trnet-default active

VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2

---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------

1 enet 100001 1500 - - - - - 1002 1003

1002 fddi 101002 1500 - - - - - 1 1003

1003 tr 101003 1500 1005 0 - - srb 1 1002

1004 fdnet 101004 1500 - - 1 ibm - 0 0

1005 trnet 101005 1500 - - 1 ibm - 0 0

Router#

If there is anything else you need to know, please tell me, because I'm stuck.

[tekha]

Well, well what do you know, apparantly this command "bridge 1 route ip" makes all the difference.

Everything is working as intended.