Hello,Here is my issue I have a 6509 loaded with the following cards. 1 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX 2 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX 3 6 Firewall Module ...
can anyone tell me why we using 51.2microseconds for time slots?or 512bit as the minimum frame size?i've tried to calculate thatx=(2500*2(distance))/(2*10(8))it get 25micsecond
Catalyst 4948sIOS 12.2 EWA4Must be something fundamental on this one.PC on access switchport can ping Vlan 1 IP address but switch cannot ping PC. MAC address shows up in mac-address table after PC pings Vlan 1 IP address but ping from switch still ...
I have a Gateway 7206VXR, Core 7206VXR, and 6 6509's running Sup2U-MSFC2's. I am running BGP on my Gateway router and it is routing our /19 to the Core. I am doing layer3 switching on all my 6509's.The problem is routing between my Core and all my MS...
Could any one help me out here. I'm totally lost.I can't get the dhcp server to work, infact I can't even ping the routers LAN IP. However I have a cabled PC on Fast0 and a laptop on the wireless, and they are infact able to ping each other.Here is t...
HelloI finished running SDM Express setup on my Cisco 1811W router. When I try and access the home page, I get a Java overflow error. Has anyone seen this or no why this is happening? I have tried other servers etc.
I studying for the BCMSN exam and have bought a 3524xl-en switch to use in my lab.I am wondering if it is possible to ugrade the memory/flash on this switch. It currently has 8MB ram and 4 MB flash and been advised not to ugrade to the lastest ios (...
We are having problems with Symantec Ghost 8.0 (Solution Suite 1.0) multicast sessions autonegotiating and transmitting at 10MB half duplex over stacked 10/100 Catalyst 3750s (WS-C3750-48PS-E). Both sides of the connection are set to autonegotiate....
When I configure Cisco switches unless there is a specific reason to use VTP (legacy network) I would normally configure VTP Transparent (or if its a recent CatOS switch disable VTP). I understand Server, Client & Transparent concepts but was wonder...
How we can share a Bandwidth in a VLAN, I mean share a Bandwidth in a single VALN Clients, can we do it through a IOS configuration or is there any hardware for this solution, Note: Currently we are using L3(3550) & L2(2950) switches. L2 in VTP clien...
I have a 6509, with two sup 720's, one is active the other is standby, when I do a sho dir disk0: is that showing the dir of the active card? I'm runn 12.2(18).sxe2
We are implementing vlans within our network. We have vlan routing in the switches working and have now moved on to test dhcp for each vlan. the microsoft team has set up a superscope on the test dhcp server and when a workstation say from vlan 10 t...
