08-02-2004 12:45 PM - edited 03-02-2019 05:28 PM
I have tried to configure callback for NM-8AMv2 but no success.If I remove the callback configuration (ppp callback accept/permit) from Group Async, everything becomes ok.(Dial in users can get access to the network) Here is the my configuration.When I open debugs, I can see PPP authentication succeeded, Link Protocol is being UP, but the router is not cutting out the connection and triggering callback. I dont know why. I have read on discussion boards, some people faced with the same problem.Any suggestion.....
Current configuration : 4340 bytes
!
version 12.3
service exec-callback
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname buras
!
boot-start-marker
boot-end-marker
!
enable secret xxxxx
!
username xxx password xxx
username xxx callback-dialstring xxx
username ras callback-dialstring "" xxx
no network-clock-participate slot 1
no network-clock-participate slot 2
no network-clock-participate wic 0
no network-clock-participate wic 1
no network-clock-participate wic 2
no network-clock-participate aim 0
no network-clock-participate aim 1
modem country smart_acf turkey
aaa new-model
!
!
aaa authentication login default none
aaa authentication login no_tacacs enable
aaa authentication login use-local local
aaa authentication ppp default local
aaa authorization network use-local local
aaa session-id common
ip subnet-zero
ip cef
!
!
!
!
no ftp-server write-enable
!
chat-script reset "" "at&fb0x4&a3&c1&d2&m4&h1&k1&b1&r2&s1s0=1&w" "OK" ""
chat-script rbtrcallback ABORT ERROR ABORT BUSY "" "ATZ" OK "ATDT \T" TIMEOUT 30 CONNECT \c
chat-script offhook "" "ATH1" OK
chat-script callback ABORT ERROR ABORT BUSY "" "ATZ" OK "ATDT \T" TIMEOUT 30 CONNECT \c
!
!
!
interface Loopback0
ip address 192.168.1.1 255.255.255.0
!
interface FastEthernet0/0
ip address 192.168.2.1 255.255.255.0
duplex auto
speed auto
!
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
interface Serial1/0
no ip address
shutdown
!
interface Serial1/1
no ip address
shutdown
!
interface Serial1/2
no ip address
shutdown
!
interface Serial1/3
no ip address
shutdown
!
interface Serial1/4
no ip address
shutdown
!
interface Serial1/5
no ip address
shutdown
!
interface Serial1/6
no ip address
shutdown
!
interface Serial1/7
no ip address
shutdown
!
interface Group Async 1
ip unnumbered Loopback0
encapsulation ppp
ip tcp header-compression
dialer in-band
dialer-group 1
async mode interactive
peer default ip address pool servus
ppp callback accept
ppp authentication chap
!
!
ip local pool servus 192.168.1.10 192.168.1.50
ip classless
ip http server
!
!
!
!
map-class dialer callback
dialer callback-server username
dialer-list 1 protocol ip permit
!
control-plane
!
!
line con 0
line 65 72
script dialer callback
script modem-off-hook offhook
script callback callback
login authentication use-local
modem InOut
modem autoconfigure discovery
transport input all
autoselect during-login
autoselect ppp
callback forced-wait 30
line aux 0
line vty 0 4
!
!
end
08-04-2004 09:50 PM
Can you please capture the following debugs for an attempted callback call (with msec timestamps):
deb chat / deb modem / deb ppp nego / deb callback
deb authentication / deb aaa authorization
Thanks, Mak
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide