07-02-2003 12:23 PM - edited 03-02-2019 08:35 AM
Hi,,, I have problems with de Callback process.
The debug ppp cbcp show the messages:
01:24:40: As70 MCB: Initialize
01:24:40: As70 MCB: Flush
01:24:40: As70 MCB: Start
01:24:40: As70 MCB: Callback not authorized for this user ale
01:24:40: As70 MCB: Newstate 0-INIT -> 2-WAIT_RESPONSE
01:24:40: As70 MCB: O Request Id 3 Callback Type None
01:24:40: Async70 PPP: I MCB Response(2) id 3 len 6
01:24:40: Async70 MCB: I 2 3 0 6 1 2
01:24:40: As70 MCB: Received response
01:24:40: As70 MCB: Response CBK-None 1 2
01:24:40: As70 MCB: O Ack Id 4 Callback Type None
01:24:40: As70 MCB: No Callback negotiated; Exit
01:24:40: As70 MCB: Flush
Any Idea ???
This is the config of the router :
version 12.2
no service pad
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname kapucci
!
logging buffered 4096 debugging
aaa new-model
aaa authentication login default local group tacacs+
aaa authentication login consoleport none
aaa authentication ppp default if-needed local group tacacs+
aaa authorization network default if-authenticated local group tacacs+
aaa authorization network isdn none
aaa accounting nested
aaa accounting network default start-stop group tacacs+
aaa session-id common
!
username ale callback-dialstring 3463 password xxx
ip subnet-zero
no ip source-route
!
!
ip domain-name x.x.x.x
ip name-server x.x.x.x
!
async-bootp nbns-server x.x.x.x
isdn switch-type primary-net5
chat-script offhook "" "ATH1" OK
chat-script name ABORT ERROR ABORT BUSY "" "ATZ" OK "ATDT \T" TIMEOUT 3
\c
modemcap entry mica1:MSC=&F&D2S34=18000S40=10S54=172S53=0
fax interface-type fax-mail
mta receive maximum-recipients 0
!
interface Loopback0
no ip address
!
interface FastEthernet0/0
ip address x.x.x.x 255.255.255.0
ip nat inside
duplex auto
interface Group-Async0
ip unnumbered FastEthernet0/0
ip access-group socios in
encapsulation ppp
no ip mroute-cache
no logging event link-status
async mode interactive
peer default ip address pool ippool
no fair-queue
ppp authentication chap pap
group-range 65 69
!
interface Group-Async1
ip unnumbered FastEthernet0/0
encapsulation ppp
ip tcp header-compression passive
no ip mroute-cache
no logging event link-status
async mode interactive
peer default ip address pool ippool2
no fair-queue
ppp callback accept
ppp authentication pap chap
group-range 70 80
!
ip local pool ippool2 z.z.z.z z.z.z.z
ip local pool ippool z.z.z.z z.z.z.z
call rsvp-sync
!
no mgcp timer receive-rtcp
!
mgcp profile default
!
dial-peer cor custom
line con 0
logging synchronous
transport output none
line 65 80
exec-timeout 5 0
script modem-off-hook offhook
script callback name
modem InOut
modem autoconfigure type mica1
transport input all
transport output lat pad v120 lapb-ta telnet rlogin udptn
autoselect during-login
autoselect ppp
stopbits 1
line aux 0
line vty 0 4
07-02-2003 05:50 PM
OK,,, I found then problem:
the AAA config:
aaa authorization network default if-authenticated local group tacacs+
The problem is the word "if-authenticated" because this doesn't work with Callback.
I change the config for:
aaa authorization network default local group tacacs+ and the Callback work fine.
Thanks all.
Regards....
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide