I have recently been given the task of installing 1600 routers between two locations. After the quick start wizard failed to detect our leased line, I have set the routers up using a recommended procedure from cisco as follows
hostname oelwein!
enable secret cisco
!
ip subnet-zero
no ip domain-lookup
!
interface Ethernet0
ip address 192.168.0.254 255.255.255.0
interface Serial0
description Leased Line to Boston
ip unnumbered Ethernet0
encapsulation ppp
router rip
version 2
network 192.168.0.0
no auto-summary
!
ip http server
ip classless
!
line con 0
password console
login
line aux 0 <*>
line vty 0 4
password telnet
login <*>
!
end <*>
The other end is the same except for the ip address of 192.0.0.221 and network 192.0.0.0
I get both interfaces up-up and can ping the other router and also our dsl router at 192.0.0.167. I can't ping any workstations in the 192.0.0.0 network from the 192.168.0.0 network the packets come back unreachable.
Do I have to set up some default routes? I thought the purpose of the routers were to discover these routes and pass them to each other.
Darin
