Catalyst 6009 + WS-X6K-SUP1A-2GE + WS-F6K-MSFC

[a.manso]

I have got a Catalyst 6009 with:

Supervisor and redundant supervisor WS-X6K-SUP1A-2GE With WS-F6K-MSFC.

2 x WS-X6408-GBIC Module

1 x WS-X6248-RJ-45 Module

I need 32 port 10/100/1000. Can I use WS-X6148GE-TX module? What I need? upgrade memory? upgrade software? upgrade MSFC to MSFC2?

Thanks

[Prashanth Krishnappa]

Are you running Hybrid OS or Native IOS? If Hybrid, you'll need a minimum CAT OS of 7.6(1). 7.6(7) is the latest we have. Note that you will need 128MB DRAM on the Sup to run 7.6(x). MSFC IOS does not matter

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/relnotes/ol_1982.htm#wp361820

If you are running native IOS, you will need minumum IOS 12.1(19)E1

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/12_1e/ol_2310.htm#wp1343523