06-11-2002 01:17 PM - edited 03-01-2019 10:08 PM
Hello Everyone.
Backgroud: I have a WinNT network and I just had Ameritech install the CISCO 1700 router to access the internet through a T1. The tech was able to ping yahoo and told me that as long as I put the Ameritech DNS numbers in the client search order everthing should work. Well it didn't
The clients are assigned IP's dynamically. Could you please tell me what I am missing here? Since we are a bank our routers are handled by an outside firm who handles the banking transactions. Do we need to have the DSN's put in the routers?
Thanks for any help..
email: cjenkins@secondfederal.com
06-11-2002 07:14 PM
hi friend, i think you can add dns' address in the client althouth the clients are assighed ip 's dynamiclly.
06-11-2002 10:05 PM
The DNS entries need to go in your DHCP/BOOTP server so when the server assigns an IP to clients the DNS is part of the information the client learns dynamically.. If the outside firm handles your DHCP/BOOTP server you will need to contact them.
If one of your staff handles the server, then they'll need to make the changes.
You can also assign the DNS IP's on each PC manually as the other gentlemen stated.
06-11-2002 11:41 PM
u can configure DNS in the router
router(config)# ip name-server X.X.X.X
router(config)# ip domain-lookup
from the cmd DOS of a PC make:
c:> ipconfig
check every thig is OK (specially the gateway address)
then
c:> ping www.yahoo.com
06-12-2002 01:36 PM
That makes the router a DNS client, not a DNS server/proxy for other devices.
06-12-2002 01:49 PM
I really appreciate all of the replies from everyone. thanks
That is sort of what I thought. Let's make srue I understand!
Since the clients on my network recieve their IP"s dynamically from a DHCP that the other company handles then they need to put the DNS's in those routing tables so that my clients recieve that information along with their IP addresses?
Other than that I should not have to do any configuration with the clients?
I do not want the CISCO router to act as the DHCP so this should take care of this?
THanks so much for your help!!!!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide