Cisco 6509 Sup2 upgrade Sup720

[l-gu]

I'm planning to upgrade Cisco 6509 Sup2 engine to Sup720-3B, below is my current hardware configuration on Cisco 6509:

1.WS-6509-NEB

2.WS-CAC-2500W

3. WS-X6K-SUP2-2GE

To upgrade it, I'll buy following something,

1. WS-6509-NEB-UPGRD=

2. WS-SUP720-3B=

But I can't make sure if new power supply and fan tray for Sup720 is belong to WS-6509-NEB-UPGRD.Who can help me? It's very urgent!Thanks in advance!

Best Regards,

Mario

[pflunkert · Accepted solution]

Hi Mario,

for the sup 720 you need a 2500W Power Supply (which yoou have) and a new FAN Tray. Your original Fan Tray should be the WS-C6509-NEB-FAN, the new is a WS-C6509-NEB-FAN2. A fine FAQ about the Sup 720 you will find here: http://www.cisco.com/en/US/products/hw/switches/ps708/products_qanda_item09186a0080159963.shtml

Regards

Peter

[erodadi]

You just need to buy high speed fan tray (ws-c6k-9slot-fan2).

Sup 720 has minimum requirement 2500W power supply so you can use your current power supply.