09-16-2003 02:01 PM - edited 03-02-2019 10:22 AM
I am configuring an Cisco 2 Port RJ48 Multiflex trunk-G.703 for data. I am connecting to a E1 wireless provider. Can anyone say if the config bellow is ok ....
configure terminal
controller E1 1/0
framing crc4
linecode hdb3
channel-group 0 timeslots 1-31
Clock Source Line
no shutdown
!
interface Serial 1/0:0
ip address 209.165.200.253 255.255.255.224
encapsulation PPP
keepalive 60
!
interface FastEthernet0/0
ip address 209.165.201.1 255.255.255.224
!
router rip
network 209.165.200.224
network 209.165.201.0
09-17-2003 05:16 PM
The configuration looks fine to me. Clock source default to line anyway.
Regards,
/Bessie
09-18-2003 12:13 PM
Thanks a million /Bessie.
cheers Hero
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide