Clear trunk command similar to clear counters on a port or module

[ccoletti]

Hello Everyone,

Looking at the trunk port below from a Cisco 6509 running code. 6.3(5)

I like to clear the Trunk Frames TX and TrunkFramesRx

using the clear trunk command, Will this disrupt the traffic across theses links. Or will this have the same effect as clear counrters?

sh trunk detail

* - indicates vtp domain mismatch

Port Mode Encapsulation Status Native vlan

-------- ----------- ------------- ------------ -----------

1/1 desirable isl trunking 51

1/2 desirable isl trunking 51

2/1 desirable isl trunking 51

2/2 desirable isl trunking 51

15/1 nonegotiate isl trunking 1

16/1 nonegotiate isl trunking 1

Port Peer-Port Mode Encapsulation Status

-------- --------- ----------- ------------- ------------

1/1 4/2 desirable isl trunking

1/2 3/2 desirable isl trunking

2/1 3/1 desirable isl trunking

2/2 4/1 desirable isl trunking

Port TrunkFramesTx TrunkFramesRx WrongEncap

-------- -------------------- -------------------- ----------

1/1 247059433 550477452 0

1/2 181932370 370487032 0

2/1 307941817 426990573 0

2/2 307318821 119070428 0

15/1 0 0 0

16/1 0 0 0

Thank you

Charlie

[glen.grant]

The clear trunk command is used to clear the "allowed vlans" cross the trunk . To remove vlan 200 from the trunk would be clear trunk 3/2 200 . Has nothing to do with counters.

[ccoletti]

Exaclty what i was looking for. Thank you for your update and time.

Rq,

Charlie