Command to show status of LED's remotley

[jeff.phillips]

What is the command to show status of LED's remotley?

Not looking for show post but current status of led's.

[Prashanth Krishnappa]

I am assuming this is an XL series switch since you mention 'sh post' command. There is no CLI to check for status of LEDs. But if you have CNA/CMS, you can check for status in the web interface

http://www.cisco.com/en/US/products/ps5931/products_data_sheet0900aecd8017a59e.html

In newer switches such as 4500 series, you can issue "sh environment status" command.