12-08-2004 09:08 PM - edited 03-02-2019 08:28 PM
I've run into problems setting this up, using 2 1700s over leased line with the serial ports running async.
The PPP link never comes up.
"Debug ppp neg" shows CONFFEQs but no CONFACKs
Seemingly the CONFACKs are dropped due to an "encapsulation error"
Could someone who has got this working please post their config?
12-10-2004 04:06 AM
I'm interessted what the "CONFREJ"says in your debug. That should give a clue why the other side is not accepting.
12-12-2004 09:51 PM
That's just the point. There's no CONFREJ, (or CONFACK)
The router at the other end seemingly never sees the CONFREQ
12-14-2004 12:49 AM
Snoopdoggydog,
You can read more info here regarding configuring Async PPP on Serial lines:
http://www.cisco.com/en/US/tech/tk713/tk507/technologies_configuration_example09186a00800a3b85.shtml
I hope this helps...
regards,
RdR
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide