01-22-2005 02:32 PM - edited 03-02-2019 09:14 PM
Does anyone have, or know where I can find an example of a configuration for Remote Router Management (Out of Band) using one of the ports on a WIC-2AM?
Thanks,
Mark
01-23-2005 01:46 AM
Hi mark,
try reading this document.
http://www.cisco.com/warp/public/471/dialout-nmam.html
do let us know if this helps...
Raj
01-29-2005 06:58 PM
interface Async2
description Router management dialup port
ip unnumbered FastEthernet0/0
encapsulation ppp
ip tcp header-compression
async dynamic address
async mode interactive
no peer default ip address
pulse-time 1
ppp authentication chap
dialer-list 1 protocol ip permit
line 2
password XXXXXXXXX
login
modem InOut
modem autoconfigure type scm
transport input telnet
stopbits 1
speed 115200
flowcontrol hardware
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide