Our company ordered a couple of Cat 6506's a few weeks ago, and they just came in. I haven't unpacked them yet, but does anyone know by default, which type of OS is on the Sup mod (we have 2 WS-C6K-S2-MSFC2). Is it IOS or CatOS?Thanks!
Good morning,Got a question about 802.1q tagging.Got the following configuration:(VLAN4)3550(VLAN4)--(VLAN10)3550(VLAN10)--(VLAN10)2950(VLAN10)My hosts in VLAN 10 is connected to the 2950.He needs to acces a 3550 server in VLAN 4 connected to the 355...
Got a 3500 and a 2950 connected via fiber GBICs with both ports set to auto.3500 'show int gi0/1' output:"Full-duplex, link type is autonegotiation, media type is SX"2950 output of int:"Full-duplex, 1000Mb/s"Although the links are UP & UP and the lig...
I have a 8 switch stack of 3750 switchesswitch 1-WS-C3750G-12S-E C3750-i5-mz.121-19.EA1d.binswitch 2-WS-C3750G-12S-E C3750-i5-mz.121-19.EA1d.bin switch 3-WS-C3750G-12S-E C3750-i5-mz.121-19.EA1d.bin switch 4- WS-C3750G-16TD-E C3750-i5-mz.122-18.SE1.bi...
Am I correct to assume that what needs to be done is configuring HSRP (requires EMI version) and Cluster Standby?Any difficulties ahead for those of you who have done this?Anything more that I should consider?Thanks..
HiI've got this C2900xl which is very poorly configured and while analyzing the config, I attempted to telnet from the console of this switch to another switch on the network, but I made a typo in the IP address and instead of hitting the other switc...
Need your help guys. I found a bad redundant supervisor IV module in a 4507 switch - it kept rebooting and it eventually stopped but remained in rommon mode. In an attmpt to fix, I powered down and tried replacing it with a new redundant sup module....
1. Can NAT see inside BGP update messages and change advertised networks to a different address space?2. Does the advertise-map / exist-map allow for receiving a network advertisement in one number space from one peer, and conditionaly advertise a di...
I would like to implement fragmentation between Frame PVC (DLCI), that is running Voice packets on it ( VoIP). I went through few documents available on CCO about FRF.12, and it is not clear to me if I can apply FRF with “frame-relay traffic-shaping”...
Only the Multimode SFP is available now GLC-GE-100FX (100Mb SFP to be used on Gigabit ports !).Any plans to provide the single mode version as done for the GLC-FE SFPs ?
Anyone have any tips/tools/suggestions on manually converting a configuration written in CatOS over to one compatible with IOS/Native mode? We will soon be updating/converting our supervisor modules to run Native IOS & will need to update the configu...
Hello,I'm trying to connect two separate networks together, one is HP and one is Cisco. I just need basic routing between the two, no VLAN trunking, etc.My uplink port is configured like so:interface g6/1 ip address 192.168.99.2 255.255.255.0That's...
