Configuring a 2Mbps serial port in Simplex mode

[fethi]

Hi,

I'm using a modem satellite with a VSAT in simplex mode on a 2Mbps serial port on a 3640.

I see on the interface a lot of input errors but no output errors, I think it's due to the way the port is used with the satellite modem, in simplex mode : the port is not receiving any signal from the satellite modem in input.

I'm right ?

Can I configure the serial port to work in simplex mode (just in output) ?

Thanks in advance.

Feth.

[hari_bhr]

hi

iam not sure this may help you

but u can try

ignore-dcd

if you are trying uplink from this router and downlink from sat

this may help you

best of luck

hari