Will the 2600 Series router support a WIC-1E or WIC-1ENET? I see that the 1700 series does, but can't find it on the 2600. Shouldn't it be on both?Thanks.
Does anyone know what the limitations are for using IP unnumbered for Serial/Frame Relay interfaces?I haven't been able to find a definative answer on CCO.Thanks,Dana
I am trying to upgrade from hybrid to native. I have a MSCF2 module, In ROMMON mode i have formatted the bootflash because i had the wrong IOS, I then installed a c6sup bin file. The file uncompressed and when rebooted in hangs atStart as Primary pro...
Sometimes I need to perform a "microcode reload" command on my 12012 router ,and now i wanna do this via snmp,by here I don't know the corresponding snmp MIB OID.I know this task is quite simple on normail router interface,just using snmpset to chan...
Hi.How I can speed up work snmp queries on 2980 switch? In compare with 2924/5509/5500 switches it work too slow (large timeout and little throughput).Overall cpu usage on 2980 with working snmp queries ~30%, snmpd ~ 5%.I try this on 2 switches with ...
I have a switched network with a 6509 and a bunch of 2924's and 3548's that has been using ISL for its trunking protocol. Now I've purchased some 2950's and have discovered that they don't support ISL and I have to convert to 802.1q. How painful is...
hi,my question:i have a cat 6509 which has a GigabitLink to outr mainframe.over this connection we do storage of our server to our mainframe.this applikation (adsm) uses tcp.the server and the host agree on windowsize 65535.but if the server send 2 t...
I ahve a client that has two offices both with DSL. One office has a Cicsco 678 and the other a 675. The office with the 675 has an InstaGate EX2 appliance for firewall. They want to connect the offices and be able to do VPN with IPsec. We can ad...
I have a network consisting of a 4006 SupeII w/ L3 Module in the Core, connected to Cat 3548-XLs via 2-Gbps Etherchannel Trunk at aggregation points which then connect to a mix of 2950s and 3500-XLs gigastacks connecting via 200-Mbps etherchannel. ...
Hello all,I have set-up two static routes as follows:ip route 100.0.0.0 255.0.0.0 Ethernet1ip route 100.0.0.0 255.0.0.0 20.2.1.2The second static route (with a next hop IP of 20.2.1.2) uses a serial link. Am I right in saying that only the top route ...
We mainly use IP but there is a small community of graphic artists who use MACs - they have IP & appletalk running. The VLAN which the MACs are on routes IP to the rest of the business but appletalk is isolated to the VLAN - it is just used to share ...
