Converting SUP720 from Native IOS to hybrid

[fzink]

Hi,

When we tried to convert SUP720 from Native IOS to hybrid mode we have the following error when we try to write the config.

"Not enough space on the nvram" and the write failed.

Although we are still in default config. We can't then do anything.

We encountered that error on 2 Sup720. Did you see that before?

Regards,

Frédéric

[ebreniz]

This is because the hybrid is not understanding the format of NVRAM in Native. Try this In the ROMMON prompt of MSFC(RP), unset the ROMMON variable "CONFIG_FILE" in priv mode, do a "sync" and then bring up MSFC with system image.