http://www.cisco.com/en/US/docs/ios/termserv/command/reference/tsv_cr_book.pdf
TSV-148
Cisco IOS Terminal Services commands
July 2011
Modem state
Modem control state. Although the sample output shows the modem state
Idle, this field should always say READY.
http://www.cisco.com/en/US/tech/tk801/tk133/technologies_tech_note09186a00800b1149.shtml
while on the link above suggested that the propper modem state is:
Idle
CTS noDSR DTR RTS
These are the proper modem states for connections between an access server or router and a modem (when there is no incoming call). Output of any other kind generally indicates a problem.
I am confused guys ! any clues ?
