DFM 1.2 - Catalyst 4006 - L3

[rmushtaq]

Not sure what your question is, but DFM 1.2 currently does not support Cat4K SUP-III

[srooplal]

Sorry about this , but you are correct , my question was regarding DFM 1.2 and the cat 4006 SUP III - I downloaded the latest packages , but it will not work - native IOS on the cat 4006 - I also have the same problem with the cat 6513 with native IOS with L3 links to the cat 4006 - does DFM also not support cat 6513 with native IOS

[rmushtaq]

DFM 1.2 with IDU 1.2.3 install does list 6513 as supported in the README file:

----

"Note: Added support is for the following switches when they are running the IOS operating system.

Cisco Catalyst 2950-12, 2950-24

Cisco Catalyst 2950C-24

Cisco Catalyst 2950G-12, 2950G-24, 2950G-48, 2950G-24-DC

Cisco Catalyst 2950T-24

Cisco Catalyst 3548XL

Cisco Catalyst 3550-12T, 3550-12G, 3550-24, 3550-24Dc, 3550-24Mmf, 3550-48

Cisco Catalyst 6009

Cisco Catalyst 6509

Cisco Catalyst 6513 <----- !!!!*****

----

[srooplal]

I can see the 6513 , but no logs are seen , if I drop one of the L3 links to the other switches (even to another 6513 ) , DFM does not report any errors - I should see a log for Gi1/1 is down and a mail should be sent to the recepient.

Please advise -

[rmushtaq]

Are all the DFM processes running normally?. Is your SMTP server defined properly in DFM?. What about the mail notifier adaper setup?.