DHCP server on 2948G L3

[pablohv]

I have a 2948G L3 and I need a DHCP server for each VLAN, can the Switch be a DHCP server per port??

[wukunpeng]

Catalyst 2948G-L3 IOS Release 12.0(18)W5(22a) not support DHCP server feature.

Cisco router or Cat6k MFSC IOS support DHCP Server feature.

[sguerrero]

I had the same problem and someone else from this forum helped me. You need to connect a external DHCP server in the catalyst 2948, for example BVI 1, then, in the other BVI interfaces (2, 3 , 4, etc., depending on the number of VLANs), you need to enable ip helper address x.x.x.x (where x.x.x.x is the IP of the DHCP server). It works!