09-27-2010 08:34 PM - edited 03-03-2019 06:04 AM
How can enable service-policy and traffic-shape on virtual-template in Cisco 3925 IOS c3900-universalk9-mz.SPA.150-1.M1.bin ipbase ?
Record:
policy-map test512
class class-default
shape average 128000
....
interface Virtual-Template1
service-policy output test512
....
not write error messages and don't work
Please help me.
09-28-2010 03:52 AM
Hi,
What's the output of show policy-map int?
Regards,
Lei Tian
09-28-2010 05:32 PM
#show policy-map interface virtual-template 1
Virtual-Template1
Service-policy output: test512
Service policy content is displayed for cloned interfaces only such as vaccess and sessions
After connected user and create virtual access interface:
#show policy-map interface virtual-access 4
09-28-2010 06:29 PM
Check CSCtg89489.
HTH,
Lei Tian
09-28-2010 09:54 PM
What is CSCtg89489 ?
09-29-2010 02:59 AM
How can i see this article ?
May you shows me this article here ?
09-29-2010 03:49 AM
Hi,
That is bug ID. If you have CCO ID, you can see it from bug toolkit.
Unable to apply service policy on virtual-template interface | |
Symptom: On 12.4(24)T3 and 12.4(22)T4, an applied service policy on virtual-template interface does not show up. Router#sh policy-map interface output Virtual-Template1 Service-policy output: salida_vtem Service policy content is displayed for cloned interfaces only such as vaccess and sessions Router# On 12.4(15)T5, it works fine. Conditions: NA Workaround: NA |
HTH,
Lei Tian
09-30-2010 01:57 AM
Thank you!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide