Other Network Architecture Subjects

Hi,Does anybody know where I can download Visio icons for the 12406 chassis (and others of that series) and the assorted cards to go along with it?  The 12000-series icons do not contain that series (and are from 2003!).Please advise!Thanks,~Sal

I have installed CNA 5.5 and it works fine with most of the devices, including catalyst 4500 series with different supervisors (WS-X4013+, WS-X4013+TS, WS-X45 SUP6-E).It can also detect supervisor WS-X4013+10GE, but CNA failed to show this device in ...

Is this possible to run leased line over single copper wire ( please note this is “Single copper wire" not single copper pair).

Hi,I'm considering the opportunity to update our WLCs from their current 4.2.112 software version to one of the followings newest versions:4.2(207)6.0(196)I've examined the Cisco docs, but I'm still not sure of a couple of issues ...Can anybody confi...

I am pretty sure there is no such functionality, but wanted to see if any other resourceful people have a solution for this.I am looking for the equivalent of bgp dampening for IGP (OSPF). I have a frame hub that runs OSPF with all spokes and uses V...

Router is a Cisco 1840 Series.  Our ISP controls the router,  The router is set to 10 Mb's half duplex.  Is this a common thing for the routers to come from the ISP's configured like this?  If so, is there some reason why they do this?  The half dupl...

Hi,Just new to this community hopefully someone will be able to help me out. Then as my knowledge increases hopefully I'll be able to help someone else out!I'm using a 2821 purely to provide ntp to the network. It is set as ntp master 12. If I config...

Hi All;I am looking for a consultation document that can be used for auditing the network, does any one has a sample or idea about this? A reference link or sample document that I can refer it for it?RegardsBilal

It appears from documentation thatI have been reading thatit is possible to use Netscout software to manipulate Netflow data? I have not had muc luck figuring out how to actually make this work.Any ideas?Thanks. Russ

Has anyone has any luck getting DHCP clients to register properly with IOS DNS server? I've given this a crack on various routers and I'm just about ready to give up and call it a beta capability.If you have a look at my debug below, I can successful...

Hello,Can someone advice me on a HSRP status from a supervision station :If we delete a HSRP configuration on a device, the related enties are not accordingly suppressed in the MIB. The consequence is the presence of alarms on the supervision station...

Hello,I have a catalist 6500 (sup 32) and i'm using User Based Rate Limit based on the source IP address.I have a pool with 50 public address, with ovewrload.How can i assign a diffrent IP address to each request, and only repeat the same address whe...

Does anyone know of a way to suppress a specific syslog messages from being generated? I would like to filter these from all syslogs (buffer, terminal, syslog server). I would like all other messages to generate as normal. For instance, drop anything...