error by PPP multilink dial-in

[mgrigore]

I have a DDR router with 3 x BRIs that dials into a CAS. CAS chasis type is :

cisco 2620 (MPC860) processor (revision 0x00) with 45056K/4096K bytes of memory.

IOS is System image file is "flash:c2600-js-mz.122-13b.M2"

I see all 6 B-channels coming in but during the dial I can see foll error on the log:

Feb 4 09:51:18: %PA-2-BADPABAY: Out of range PCI Port Adaptor bay -1

The Error Decoder could not find anything.

Any ideas ??

Thanx in advance. Mihai

[baileja]

This is what I pulled from Cisco when plugging in that error message:

Error Message

%PA-2-BADPABAY : Out of range PCI Port Adaptor bay [dec]

Explanation The software has specified an out-of-range port adapter bay.

Recommended Action Copy the error message exactly as it appears on the console or in the system log, contact your Cisco technical support representative, and provide the representative with the gathered information.

Doesnt look good huh. Follow this link for details:

http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_system_message_guide_chapter09186a008009e7da.html#363202