Dear All, We are using the Cisco 827 Router,ADSL connection for our LAN. Now we would like to access the Office PC from Remote location. Your kind response as to how we could be able to achieve it will be greatly appreciated. Thank you Maruti
I have a DDR router with 3 x BRIs that dials into a CAS. CAS chasis type is :cisco 2620 (MPC860) processor (revision 0x00) with 45056K/4096K bytes of memory.IOS is System image file is "flash:c2600-js-mz.122-13b.M2"I see all 6 B-channels coming in bu...
I have a C4006, NmpSW 7.4[3], currently it has one VLAN - VLAN1, with a "set int sc0 1 172.16.0.9/255.255.0.0". I want to split the X4448 in slot 6 into a second VLAN, VLAN 10, to "share" some Gigabit copper ports with a second switch - a C5000, its ...
Hi,How to troubleshooting when an AS5300 with MICA modems has below problem for dialup users :Sometime some users don't have any tcp/ip services except ping and after a while the problem solve without any alteration.more detail (on that time):- users...
HiI have a LAN on Token ring. I am in the process of upgrading to FastEthernet. I need to build 2 servers on the LAN but on Ethernet. I have spare 2513 routers and wish to bridge from the Token ring to ethernet so as to be able to use the same IP sub...
I have a software which delivers OS images to notebooks. The software uses multicast to transfer the image.Now the source and clients are connected directly to a Cisco 4506 switch with Supervisor Engine IV.They are all in the same VLAN.Do I need to c...
Hey all,Does anyone know what the results would be of mixing a stack of 3750 emi'sand smi's ?Say you were to put the controller as an EMI, can you make the rest of thestack smi's and maintain the emi capabilities....or does everything in thestack nee...
I've heard that if you have multiple high speed WAN cards on a 720x vxr that you should distributed them between oddly and evenly numbered slots.The reason for this is that the 720x vxr routers have 2 pci buses. If you put cards on only the left sid...
I've got a strange situation were every 50 pings, the response times jump to 300-400m/sec for 2-3 pings, then return to normal.We have a 7206, running at ~10% CPU Utilisation, with ~140Mb RAM free performing 802.1qThe ping fluctuations occur when I p...
I keep hearing that you will be able to have any number of local SPAN sources and destinations and there will no longer be a 2 port destination limitation. Is this true or false? Has anyone heard anything on this?Thanks, Dave
Hi,Does anyone know how to stop or kill a CPU process on a 1760 router?After configuring a "modem autoconfigure discovery" on an Asnyc line, and later removing the line, the router keeps the process running, consuming a lot of resources. The only way...
Two quick question:1. Can C6500 Sup2 without MSFC run in native mode?2. In IOS image what is the difference between Enterprise and IP image in C6500 context?Thanks in advance.
Hi,Has anyone ever an issue when you have two routers running HSRP and try and remove the HSRP config from the standby router it reboots?It seems to happen on the "standby <grp> ip" command.Anyone see this before?Thanks in advance.
I have a strange question on bandwidth monitoring. I have a Win2K network (300 clients and 11 servers), 12 cisco catalyst 3548XL switches, 2 cayalyst 4908G-L3 switches and 1 PIX 515.I want to monitor the bandwidth of my network. My question is this...
