cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
627
Views
0
Helpful
2
Replies

Error logs memory issues

ahmadbilal
Level 1
Level 1

Dear all,

Iam getting following error logs can any one make something from them.I have a 3745 with 8 E1 links.

how to rectify Memory issues.

Rgds

----------------------------------------------------------------------------------------------------------

sh logg

Syslog logging: enabled (0 messages dropped, 2 messages rate-limited, 0 flushes,

0 overruns)

Console logging: level debugging, 63967 messages logged

Monitor logging: level debugging, 0 messages logged

Buffer logging: level debugging, 63967 messages logged

Logging Exception size (4096 bytes)

Count and timestamp logging messages: disabled

Trap logging: level informational, 132991 message lines logged

Log Buffer (4096 bytes):

27w6d: %DSX1-3-M32_AR_TIMEOUT: Munich 32 action request timeout: Ctrl = 0x3E0300

13, Channel = 0

-Process= "Serial Background", ipl= 3, pid= 7

-Traceback= 60163E38 6016431C 6016443C 60166D1C 6015B734 6015B938 6015B9FC 6001D

63C

27w6d: %DSX1-3-M32_AR_TIMEOUT: Munich 32 action request timeout: Ctrl = 0x3E0300

13, Channel = 0

-Process= "Serial Background", ipl= 3, pid= 7

-Traceback= 60163E38 6016431C 6016443C 60165600 60166E78 6015B734 6015B938 6015B

9FC 6001D63C

27w6d: %DSX1-3-NOMEMORY: Unit 4, no memory for Channelized interface.

-Process= "Serial Background", ipl= 3, pid= 7

-Traceback= 6015B750 6015B938 6015B9FC 6001D63C

27w6d: %CLEAR-5-COUNTERS: Clear counter on all interfaces by vty0 (10.10.0.151)

27w6d: %DSX1-3-M32_AR_TIMEOUT: Munich 32 action request timeout: Ctrl = 0x3E0300

13, Channel = 0

-Process= "Serial Background", ipl= 3, pid= 7

-Traceback= 60163E38 6016431C 6016443C 60166D1C 6015B734 6015B938 6015B9FC 6001D

63C

27w6d: %DSX1-3-M32_AR_TIMEOUT: Munich 32 action request timeout: Ctrl = 0x3E0300

13, Channel = 0

-Process= "Serial Background", ipl= 3, pid= 7

-Traceback= 60163E38 6016431C 6016443C 60165600 60166E78 6015B734 6015B938 6015B

9FC 6001D63C

27w6d: %DSX1-3-NOMEMORY: Unit 4, no memory for Channelized interface.

-Process= "Serial Background", ipl= 3, pid= 7

-Traceback= 6015B750 6015B938 6015B9FC 6001D63C

27w6d: %DSX1-3-M32_AR_TIMEOUT: Munich 32 action request timeout: Ctrl = 0x3E0300

13, Channel = 0

-Process= "Serial Background", ipl= 3, pid= 7

-Traceback= 60163E38 6016431C 6016443C 60166D1C 6015B734 6015B938 6015B9FC 6001D

63C

27w6d: %DSX1-3-M32_AR_TIMEOUT: Munich 32 action request timeout: Ctrl = 0x3E0300

13, Channel = 0

-Process= "Serial Background", ipl= 3, pid= 7

-Traceback= 60163E38 6016431C 6016443C 60165600 60166E78 6015B734 6015B938 6015B

9FC 6001D63C

27w6d: %DSX1-3-NOMEMORY: Unit 4, no memory for Channelized interface.

-Process= "Serial Background", ipl= 3, pid= 7

-Traceback= 6015B750 6015B938 6015B9FC 6001D63C

27w6d: %DSX1-3-M32_AR_TIMEOUT: Munich 32 action request timeout: Ctrl = 0x3E0300

13, Channel = 0

-Process= "Serial Background", ipl= 3, pid= 7

-Traceback= 60163E38 6016431C 6016443C 60166D1C 6015B734 6015B938 6015B9FC 6001D

63C

27w6d: %DSX1-3-M32_AR_TIMEOUT: Munich 32 action request timeout: Ctrl = 0x3E0300

13, Channel = 0

-Process= "Serial Background", ipl= 3, pid= 7

-Traceback= 60163E38 6016431C 6016443C 60165600 60166E78 6015B734 6015B938 6015B

9FC 6001D63C

27w6d: %DSX1-3-NOMEMORY: Unit 4, no memory for Channelized interface.

-Process= "Serial Background", ipl= 3, pid= 7

-

2 Replies 2

thisisshanky
Level 11
Level 11

How much DRAM do you have ? Taking some links of the bundle might help..

Sankar Nair
UC Solutions Architect
Pacific Northwest | CDW
CCIE Collaboration #17135 Emeritus

Hi,

I am using only 2 E1 lines on a dual E1 card.but still getting the same error logs.Following is some more info.

131072K/14336K bytes of memory.

c3745-i-mz.122-8.T10.bin is the IOS

show mem

Head Total(b) Used(b) Free(b) Lowest(b) Largest(b)

Processor 612779E0 100173344 4582432 95590912 95583880 95573216

I/O 47200000 14680064 4990036 9690028 9689864 9686492

show controller e1 2/0

E1 2/0 is up.

Applique type is Channelized E1 - unbalanced

Description: LINK TO I-N ISB

No alarms detected.

alarm-trigger is not set

Framing is CRC4, Line Code is HDB3, Clock Source is Line.

Rgds.

Kindly advise.

Review Cisco Networking for a $25 gift card