07-09-2003 05:57 AM - edited 03-02-2019 08:44 AM
Is it possible to install a FWSM on a C6509 with SUP1A?
Release Notes for FWSM version 1-1-2(http://www.cisco.com/en/US/partner/products/hw/switches/ps708/prod_release_note09186a008015851e.html#43499) states that FWSM is supported with CatOS 7.5 with a Supervisor Engine 1a, and an MSFC 2 or a Supervisor Engine2 and an MSFC 2.
However, Cisco Configuration Tool gives the following message when you try to configure FWSM with SUP1A:
Configuration Guide
Errors
1. --The selection of one or more WS-SVC-FWM-1-K9 firewall modules requires the selection of a Supervisor2 with MSFC from Cat6500 Primary Supervisor Option. Please adjust your selections.--
Solved! Go to Solution.
07-09-2003 06:16 AM
It's probably a bug in the configurator tool. It is supported with Sup1
Console> (enable) sh mod
Mod Slot Ports Module-Type Model Sub Status
--- ---- ----- ------------------------- ------------------- ---
--------
1 1 2 1000BaseX Supervisor WS-X6K-SUP1A-2GE yes ok
15 1 1 Multilayer Switch Feature WS-F6K-MSFC2 no ok
2 2 6 Firewall Module WS-SVC-FWM-1 no ok
3 3 8 1000BaseX Ethernet WS-X6408-GBIC no ok
5 5 48 10/100BaseTX Ethernet WS-X6248-RJ-45 no ok
Mod Module-Name Serial-Num
--- -------------------- -----------
1 SAD044505P9
15 SAD04420LM7
2 SAD071903GJ
3 SAD03070279
5 SAD041500VP
Mod MAC-Address(es) Hw Fw Sw
--- -------------------------------------- ------ ----------
-----------------
1 00-01-63-d0-6c-d8 to 00-01-63-d0-6c-d9 7.0 5.3(1) 7.6(1)
00-01-63-d0-6c-d6 to 00-01-63-d0-6c-d7
00-02-17-77-98-00 to 00-02-17-77-9b-ff
15 00-04-4d-47-bd-c0 to 00-04-4d-47-bd-ff 1.1 12.1(11b)E
12.1(11b)E11
2 00-0c-85-3f-f5-80 to 00-0c-85-3f-f5-ff 2.0 7.2(1) 1.1(2)
3 00-50-54-6c-92-b0 to 00-50-54-6c-92-b7 1.9 5.4(2) 7.6(1)
5 00-01-97-49-8b-10 to 00-01-97-49-8b-3f 1.2 5.1(1)CSX 7.6(1)
Mod Sub-Type Sub-Model Sub-Serial Sub-Hw
Sub-Sw
--- ----------------------- ------------------- ----------- ------
------
1 L3 Switching Engine WS-F6K-PFC SAD04440FFV 1.1
07-09-2003 06:16 AM
It's probably a bug in the configurator tool. It is supported with Sup1
Console> (enable) sh mod
Mod Slot Ports Module-Type Model Sub Status
--- ---- ----- ------------------------- ------------------- ---
--------
1 1 2 1000BaseX Supervisor WS-X6K-SUP1A-2GE yes ok
15 1 1 Multilayer Switch Feature WS-F6K-MSFC2 no ok
2 2 6 Firewall Module WS-SVC-FWM-1 no ok
3 3 8 1000BaseX Ethernet WS-X6408-GBIC no ok
5 5 48 10/100BaseTX Ethernet WS-X6248-RJ-45 no ok
Mod Module-Name Serial-Num
--- -------------------- -----------
1 SAD044505P9
15 SAD04420LM7
2 SAD071903GJ
3 SAD03070279
5 SAD041500VP
Mod MAC-Address(es) Hw Fw Sw
--- -------------------------------------- ------ ----------
-----------------
1 00-01-63-d0-6c-d8 to 00-01-63-d0-6c-d9 7.0 5.3(1) 7.6(1)
00-01-63-d0-6c-d6 to 00-01-63-d0-6c-d7
00-02-17-77-98-00 to 00-02-17-77-9b-ff
15 00-04-4d-47-bd-c0 to 00-04-4d-47-bd-ff 1.1 12.1(11b)E
12.1(11b)E11
2 00-0c-85-3f-f5-80 to 00-0c-85-3f-f5-ff 2.0 7.2(1) 1.1(2)
3 00-50-54-6c-92-b0 to 00-50-54-6c-92-b7 1.9 5.4(2) 7.6(1)
5 00-01-97-49-8b-10 to 00-01-97-49-8b-3f 1.2 5.1(1)CSX 7.6(1)
Mod Sub-Type Sub-Model Sub-Serial Sub-Hw
Sub-Sw
--- ----------------------- ------------------- ----------- ------
------
1 L3 Switching Engine WS-F6K-PFC SAD04440FFV 1.1
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide