Hi,
We want to limit the usage of hhtp type traffic in our brancheson FR(256kbps or 512kbps( in any case).
I know CAR rate limiting and also policy based rate limiting can be a solution.
But When I implemented car rate limiting feature to router I didn't see any impact of it.
Configuration like that
interface Serial0/0.1 point-to-point
ip address 192.168.1.2 255.255.255.0
no ip directed-broadcast
rate-limit input access-group 101 128000 24000 24000 conform-action transmit exceed-action drop
rate-limit output access-group 101 128000 24000 24000 conform-action transmit exceed-action drop
frame-relay interface-dlci 121 IETF
access-list 101 permit tcp any any eq www
( I'm waiting to limit http traffic to 128kbps)
Is anyone have any idea?
ROuter#sh ver
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-I-M), Version 12.0(5)T1, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Tue 17-Aug-99 13:57 by cmong
Image text-base: 0x80008088, data-base: 0x8072C5D4
ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
ANKARA uptime is 5 weeks, 15 hours, 53 minutes
System returned to ROM by reload at 02:53:54 UTC Sat Feb 8 2003
System image file is "flash:c2600-i-mz.120-5.T1"
cisco 2620 (MPC860) processor (revision 0x101) with 20480K/4096K bytes of memory.
Processor board ID JAB040300Q3 (1936841365)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
Basic Rate ISDN software, Version 1.1.
1 FastEthernet/IEEE 802.3 interface(s)
1 Serial network interface(s)
1 ISDN Basic Rate interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)
