FTP DHCP database to a netware FTP server
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
01-18-2002 06:46 PM - edited 03-01-2019 08:07 PM
I would like to know how to ftp, from the router, to a netware based ftp server. Considering the fact that you need to provide a username and password.
I am currently ftp-ing my dhcp databases from the routers to an NT Server. This command(below) works fine...
'ip dhcp database ftp://Cisco:ncs271@172.122.159.252/Database/Dhcpdb'
However, I am now required to move this to a Netware server and it is not working. I think the problem is that cisco routers cannot send ftp to a context based user as it has to login to the ftp service before it can transfer the file. Where as an nt servers ftp only needs username:password. ie: the command below doesn't work.
'ip dhcp database ftp://username:password@172.122.159.253/sys/ftp/downloads/dhcpdb'
Am i right in saying that this cannot be done or can someone offer me some advice on how to get this to work.
Thank you
- Labels:
-
Other Networking
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
01-25-2002 12:53 PM
Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center (http://www.cisco.com/tac) or speak with a TAC engineer. You can open a TAC case online at http://www.cisco.com/tac/caseopen
If anyone else in the forum has some advice, please reply to this thread.
Thank you for posting.
