01-15-2005 12:50 AM - edited 03-02-2019 09:05 PM
I have a Catalyst 3548 switch with to GBICs (WS-G5483) inserted. I have two questions:
1. Can the GBIC be used to connect directly to a server with a gigabit NIC?
2. Can I use Etherchannel with these two GBICs to connect to my server with two gigabit NICs teamed?
Many thanks
Mark
Solved! Go to Solution.
01-15-2005 01:25 AM
Hello Mark,
AFAIK, the answer is yes to both questions. Check the GBIC product page, it also tells you the cabling requirements:
Cisco 1000BaseT Gigabit Interface Converter (GBIC)
http://www.cisco.com/en/US/products/hw/modules/ps872/products_data_sheet09186a00800913cd.html
HTH,
GP
01-15-2005 01:25 AM
Hello Mark,
AFAIK, the answer is yes to both questions. Check the GBIC product page, it also tells you the cabling requirements:
Cisco 1000BaseT Gigabit Interface Converter (GBIC)
http://www.cisco.com/en/US/products/hw/modules/ps872/products_data_sheet09186a00800913cd.html
HTH,
GP
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide