06-23-2002 05:04 PM - edited 03-01-2019 10:21 PM
CISCO 2511 router interface seri0 problem
Router#debug seri int
Serial network interface debugging is on
Router#
-5-UPDOWN: Line protocol on Interface Serial0, changed state to down
Serial0: attempting to restart
HD(0): Deasserting DTR and RTS
HD(0): Reset from 0x30286DA
HD(0): Asserting DTR
HD(0): Deasserting LTST
HD(0): Asserting DTR and RTS
Serial0: HDLC myseq 830, mineseen 0*, yourseen 25, line up
-5-UPDOWN: Line protocol on Interface Serial0, changed state to up
serial: decompress error - sending packet to Abort Queue
Serial0 - Keepalive time mismatch - should be 10 secs, is 19
Serial0: HDLC myseq 831, mineseen 831*, yourseen 34, line up
Serial0 - Keepalive time mismatch - should be 10 secs, is 19
Serial0: HDLC myseq 832, mineseen 0*, yourseen 15, line up
HD(0): Input buffer overflow.
Serial0: HDLC myseq 833, mineseen 833*, yourseen 23, line up
Serial0 - Keepalive time mismatch - should be 10 secs, is 20
Serial0: HDLC myseq 834, mineseen 834*, yourseen 30, line up
HD(0): Input buffer overflow.
Serial0: HDLC myseq 836, mineseen 836*, yourseen 45, line up
Serial0 - Keepalive time mismatch - should be 10 secs, is 29
.....
What can I do?
06-23-2002 07:06 PM
can you post your serial config? Try posting the buffer statistics. Are there any queueing configured? Try the default keepalive settings.............. if you have set it manually...........
Good luck........
06-23-2002 07:32 PM
Thanks,that's "show int s0" message:
"Router#sh int s0
Serial0 is up, line protocol is up
Hardware is HD64570
Internet address is *.*.*.*/30
MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec, rely 255/255, load 24/255
Encapsulation HDLC, loopback not set, keepalive set (10 sec)
Last input 00:00:00, output 00:00:00, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/2232 (size/max/drops); Total output drops: 1116
Queueing strategy: weighted fair
Output queue: 0/1000/64/1116 (size/max total/threshold/drops)
Conversations 0/16/256 (active/max active/max total)
Reserved Conversations 0/0 (allocated/max allocated)
5 minute input rate 1056000 bits/sec, 134 packets/sec
5 minute output rate 146000 bits/sec, 96 packets/sec
6883688 packets input, 1034322262 bytes, 86 no buffer
Received 10165 broadcasts, 0 runts, 0 giants, 0 throttles
1998 input errors, 844 CRC, 0 frame, 574 overrun, 574 ignored, 845 abort
5905634 packets output, 1883454948 bytes, 0 underruns
0 output errors, 0 collisions, 34 interface resets
0 output buffer failures, 0 output buffers swapped out
0 carrier transitions
DCD=up DSR=up DTR=up RTS=up CTS=up
Router#
"
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide