04-07-2005 04:45 AM - edited 03-02-2019 10:23 PM
Hi,
I have purchased a WS-c4510r chasis with 2 supervisor engines WS-x4013+ and have just discovered that these supervisor II+ engines are not supported in this 10 slot chasis.(They are supported in all other chasis sizes but only the supervisor V is supported 10 slot). Does anyone know if there is some way to enable these WS-x4013+ to work in this chasis. Any help would be very much appreciated as my job in very much in doubt as i spent Euro7k on the wrong equipment and as the purchase agreement states - no goods can be returned.
04-07-2005 05:15 AM
Unfortunately no. The Sup2+ does not have the required backplane capacity for a 4510. Only Sup5 and Sup5-10GE Supervisors are supported in a 4510R chassis
04-22-2005 06:16 AM
Dear iamuseless,
So sad to hear that you had purchase WS-X4013+ to use with 4510R. Yes 4510R support only SupV and SupV-10GE.
WS-X4013+ able to be used with 4507R in redundancy mode. You should consider trade-off 3slots for sup2+ to work. Your vendor should able to help you on this.
Further more for what vendor let you buy this together or else?
Amnuay
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide