05-08-2003 06:51 AM - edited 03-02-2019 07:12 AM
I keep getting this on my change audit, it is a Catalyst 6509 and it is flooding my log. I have went to Administration, Inventory Change Report Filter and checked everything that has to do with Flash. But I still get it.
thanks in advance, jg
Section: Flash Device
Detected: 8 May 2003 09:30:21 EDT Key Attribute Current Value Previous Value Action
Section: Flash Partition
Detected: 8 May 2003 09:30:21 EDT Key Attribute Current Value Previous Value Action
05-14-2003 07:38 AM
You can filter the devices for which you do not need the reports. Go to Resource Manager Essentials -> Change Audit- > Search Change Audit. Here you can select the required devices and cilck " NEXT". You can filter the change audit reports by selecting the appropriate options. In Change Audit, select Filter Options.There select the required catogory and the applications. With this you get only the reports you require .
05-28-2003 05:58 AM
I did what you suggested, but this doesn't slove my issue if I go to RME>Change Audit>All Changes....What is happening is when the devices get polled it is getting just message that state flash partition and flash device and no info. see below. I also changed the attributes in the Administration>Inventory>Inventory Change Filter, but still no luck. I have a case opened with the TAC for about 4 weeks. They're clueless.
Section: Flash Device
Detected: 28 May 2003 09:30:25 EDT Key Attribute Current Value Previous Value Action
Section: Flash Partition
Detected: 28 May 2003 09:30:25 EDT Key Attribute Current Value Previous Value Action
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide