How to know the VIP type by "show diag"?

[h_w_z]

Hi,everyone,I have a question:

information-based of "cisco 7XXX show diag", how to know which one VIP type ?

Router#show diag 10

Slot 10:

Physical slot 10, ~physical slot 0x5, logical slot 10, CBus 0

Microcode Status 0x4

Master Enable, LED, WCS Loaded

Board is analyzed

Pending I/O Status: None

EEPROM format version 1

VIP2 RSK controller, HW rev 2.02, board revision D0

Serial number: 17090200 Part number: 73-2167-05

Test history: 0x00 RMA number: 00-00-00

Flags: cisco 7000 board; 7500 compatible

EEPROM contents (hex):

0x20: 01 1E 02 02 01 04 C6 98 49 08 77 05 00 00 00 00

0x30: 68 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Slot database information:

Flags: 0x4 Insertion time: 0x18C0 (00:29:13 ago)

Controller Memory Size: 32 Mbytes DRAM, 4096 Kbytes SRAM Your supervisor wants to know what model

[a.awan]

The value of the EEPROM address 0x21 is what tells you which VIP it is. This link has the information you need:

http://www.cisco.com/en/US/products/hw/modules/ps2643/products_tech_note09186a0080094b15.shtml#identifyvip

By the way yours is a VIP2-50

[jolmo]

It's a VIP2-50.

Check following and you will learn how to know it:

http://www.cisco.com/univercd/cc/td/doc/product/core/cis7505/vip1/vip2/2658vip2.htm#108093

HTH