Hi,
I have a Cisco Catalyst switch, and configured it to support snmp v3 management. Under snmp v2 or v1, as we all know, to obtain a specific vlan's info, we must postfix a vlan number with a '@' after the community string, such as 'public@68' to get vlan 68's fdb information. But when I switches to v3, this seemed not work at all. Can anybody tell me the solution?
========================================
example:
below is an example when I'm under snmp v2
--------------------------------------------
nms-server2:/home/ccarring> snmpwalk -c public@2 14.32.6.17 dot1dTpFdbAddress
nms-server2:/home/ccarring> snmpwalk -c public@6 14.32.6.17 dot1dTpFdbAddress
.1.3.6.1.2.1.17.4.3.1.1.0.2.185.144.76.102 = Hex-STRING: 00 02 B9 90 4C 66
.1.3.6.1.2.1.17.4.3.1.1.0.2.253.106.170.243 = Hex-STRING: 00 02 FD 6A AA F3
.1.3.6.1.2.1.17.4.3.1.1.0.16.13.56.16.0 = Hex-STRING: 00 10 0D 38 10 00
.1.3.6.1.2.1.17.4.3.1.1.0.96.84.144.248.0 = Hex-STRING: 00 60 54 90 F8 00
.1.3.6.1.2.1.17.4.3.1.1.0.208.2.214.120.10 = Hex-STRING: 00 D0 02 D6 78 0A
.1.3.6.1.2.1.17.4.3.1.1.0.208.211.54.162.60 = Hex-STRING: 00 D0 D3 36 A2 3C
.1.3.6.1.2.1.17.4.3.1.1.0.224.30.159.10.210 = Hex-STRING: 00 E0 1E 9F 0A D2
nms-server2:/home/ccarring> snmpwalk -c public@7 14.32.6.17 dot1dTpFdbAddress
.1.3.6.1.2.1.17.4.3.1.1.0.16.13.161.24.32 = Hex-STRING: 00 10 0D A1 18 20
=============================================
Under snmp v3, how could I snmpwalk like the above example?