09-25-2002 01:31 AM - edited 03-02-2019 01:37 AM
My router 3640 12.1T,I want it send link up or down status to hp openview.
I has use " snmp-server host 10.1.1.1 informs ver 2c public snmp" .There is not packet send to ov. When i use " snmp-server host 10.1.1.1 trap snmp,there are snmp packets send to ov.
How to set? Can you help?
09-25-2002 01:47 AM
Hello,
with snmp-server host 10.1.1.1 trap snmp command you configure the router to send only the snmp trap to the host 10.1.1.1.
Andrea.
09-25-2002 09:28 AM
09-25-2002 04:40 PM
I has seen : http://www.cisco.com/warp/public/477/SNMP/snmp_traps.html.
I only want to send a inform when the link up or down.
I set : snmp-server host 10.1.1.1 informs ver 2c public snmp
snmp-server enble informs(when i set .this line can not see in running-config)
But when the link up , no packet is sent!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide