12-15-2001 07:55 PM - edited 03-01-2019 07:45 PM
I have a cisco2610 with bri interface card and a NT1
CPE ,how can I config the router shares 128k BW to
hosts connect to FasterEthernet0/0 interface ?
thanks
12-16-2001 05:41 PM
Hi,
Your question is not clear.Could you please clarify what exactly you are aiming at.
Thanks
kanwal
12-17-2001 05:18 AM
I have a ISDN device (include NT1) and there is also a redudant ISDN bri module(T/S port) with cisco2610 so I want to use them to share the internet connects to LAN users .
Is it feasible & how can I config them?
Thanks
12-17-2001 05:50 AM
If i am understand your question correctly, you are trying to connect to the ISP using your Bri module on your 2610 and let your users(connected through the LAN port) to share this connection.
Follow the link and take a look at the config for the 1600.
http://www.cisco.com/warp/public/793/access_dial/5300.html
Hope this helps.
Regards,
Ron
12-18-2001 04:34 AM
It's useful ,thank you for your help.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide