I have two routers :
Router A's HSRP Config:-
interface Ethernet0
ip address 10.105.2.18 255.255.255.0
standby 10 ip 10.105.2.2
standby 10 priority 105
standby 10 preempt
standby 10 track Serial0
ipx network 538
!
Interface Serial0
ip address 10.105.254.253 255.255.255.248
ipx network 2
bridge-group 1
!
Router eigrp 100
network 10.0.0.0
no auto-summary
Router B's HSRP Config:-
interface FastEthernet0/0
description *** Link to Bonhill LAN ***
ip address 10.105.2.16 255.255.255.0
no shutdown
standby 10 ip 10.105.2.2
standby 10 priority 100
standby 10 preempt
standby 10 track Serial0/0
speed auto
ipx network 538
bridge-group 1
bridge-group 1 spanning-disabled
!
Interface Serial0/0
ip address 10.105.254.245 255.255.255.248
no shutdown
ipx network 14
no fair-queue
router eigrp 100
network 10.0.0.0
auto-summary
no eigrp log-neighbor-changes
The problem is that when I test this by physically pulling out the serial connection on any router, HSRP does not activate. What could be wrong????
