Could anyone direct me to the right resources on these scenario.
main office
PIX 515
|
|
2611XM
|
|
|
2611XM
|
|
PIX 515
Branch Office
Both offices are tied together via a VPN tunnel. I'd like to prioritize the Citrix ICA traffic and everything else will be FIFO. The Citrix server is at the Main office.
I'm thinking that I need to set CQ on the outside interface of the branch office based on 100MB. For example:
interface ethernet 0
queue-list 1 queue 1 byte-count 937500
queue-list 1 queue 1 byte-count 312500
queue-list 1 protocol ip 1 tcp 1494 (ICA)
queue-list 1 1 default 2
I'm not too sure which way to go about this. Does anyone have any suggestions.
Thanks.
