11-01-2022 11:49 AM
Hi, Im new to cisco and Im trying to set the default gateway from router, so the ICMP packages can be redirected.
From the following image:
I want Router 1 to set Router 2 as G.W.
How do I configure Router 1's gateway?
11-01-2022 01:56 PM
only config in R1 the follwoing
ip route 10.3.0.0 255.255.0.0 10.2.0.3
11-01-2022 06:19 PM
I mean... it works now, the packages are being sent but ICMP type 5 (redirect) is not. Its just redirecting ICMP Echo. Im pinging from 10.2.0.2 to 10.3.0.2 with ping -n 1 10.3.0.2 and using simulation mode. Am I doing something wrong?
thank you for your response
11-02-2022 01:27 AM
I do small Lab and config GW 10.0.0.2 (R2) for R1 and config Lo in R3 and config static route from R2 to R3
now when I ping from R1 you can see in wireshark capture there is ICMP redirect,
I use GNS3, the PKT have some limit.
11-04-2022 02:26 AM
Hello,
could be related to Packet Tracer. Can you post your zipped project (.pkt) file ?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide