Could somebody please tell me why this interface is giving a lot of collisions and interface resets?
I have verified the spped and duplex but the problem still there. Any other suggestion?
Thanks
Ethernet3/0 is up, line protocol is up
Hardware is AmdP2, address is 0006.28ac.b6f0 (bia 0006.28ac.b6f0)
Description: ENLACE JOSE-TAEJ
Internet address is 167.175.XXX.XXX/24
MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec,
reliability 252/255, txload 9/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:01, output 00:00:00, output hang never
Last clearing of "show interface" counters 3w3d
Queueing strategy: fifo
Output queue 0/40, 0 drops; input queue 0/75, 0 drops
5 minute input rate 43000 bits/sec, 40 packets/sec
5 minute output rate 362000 bits/sec, 48 packets/sec
63633860 packets input, 2953326560 bytes, 0 no buffer
Received 2783968 broadcasts, 0 runts, 0 giants, 0 throttles
73 input errors, 73 CRC, 71 frame, 0 overrun, 0 ignored
0 input packets with dribble condition detected
67426757 packets output, 2044491211 bytes, 0 underruns(251948/145126/0)
867630 output errors, 397074 collisions, 863606 interface resets
0 babbles, 867631 late collision, 314972 deferred
0 lost carrier, 0 no carrier
0 output buffer failures, 0 output buffers swapped out
