IP adress

amakinde · ‎03-10-2002

To whom it may concern

Please how can erase the IP Address on a Serial interface.Thanks.

cntp · ‎03-10-2002

well go in interface mode and give the command "no ip address" thats all

Shahzad Rasheed

amakinde · ‎03-11-2002

Thanks for you reply. I went to nshut down @ the interface & then went back again & it worked.Thanks.

gsusanaa · ‎03-12-2002

Enter in interface configurationg mode and type the command "NO IP ADDRESS "

for example

ROUTER>EN

ROUTER#CONF T

ROUTER(config)#interface ethernet 0/0

ROUTER(config-if(#no ip address 12.0.0.1 255.0.0.0

Bart

geyson.rj · ‎03-12-2002

in the serial, type " No IP Address and i number IP

Geyson